Welltech FXSO Gateway In SIP V.1.2 Manual de usuario descargar pdf (Pagina 27)

FXSO SIP Gateway User Manual Document Ver.: 102

Released Dec., 2004

Please configure to PPPoE if the ADSL is using the PPPoE type.

u HTTP Port – To configure the HTTP port for access this unit from the

remote side.

u DNS primary – To configure the first ip address for the DNS server.

u DNS secondary – To configure the second ip address for the DNS server.

u SNTP – Enable the SNTP server registering function if user wants to get

the correct time from the Command Line Interface.

u SNTP Server Address – Enter the correct ip address of the SNTP server

or get the incorrect time from the Command Line Interface.

u GMT – Configuring the time area for the time display in the Command

Line Interface.

u IP Sharing – Enable this function if the gateway is behind the IP sharing

device.

u IP Sharing Server Address – Enter the WAN IP address of the IP sharing

device if it is the fixed ip.

u PPPoE User Name – To configure the user name for the PPPoE

connection.

u PPPoE Password – To configure the password for the PPPoE connection.

u PPPoE IP Address – In the PPPoE mode, this table will show the ip

address that this unit gets from the ISP.

u PPPoE Destination – In the PPPoE mode, this table will show the default

gateway address that this unit gets from the ISP.

u PPPoE DNS primary – In the PPPoE mode, this table will show the DNS

ip address that this unit gets from the ISP.

u After Remote Host Disconnection – This unit will reboot and re-connect to

the ISP

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 99 100

Sin comentarios

Welltech FXSO Gateway In SIP V.1.2 Manual de usuario Pagina 27