Welltech FXSO Gateway In SIP V.1.2 Manual de usuario descargar pdf (Pagina 67)

FXSO SIP Gateway User Manual Document Ver.: 102

Released Dec., 2004

-mask assign internet subnet mask

-gate assign IP default gateway

-mode Switch the network type (0 = Static IP; 1 = DHCP mode 2 =

PPPoE mode)

-sntp Simple Network Time Protocol (1 = ON; 0 = OFF) When

SNTP function is activated, users have to specify a SNTP

server as network time source. An example is demonstrated

below:

-dns configure the IP address for the DNS server

-timezone set local time zone according to GMT

-----------------------------------------------------------------------------------------------

usr/config$ ifaddr -sntp 1 10.1.1.1

10.1.1.1 stands for SNTP server’s IP address.

-id To configure the pppoe connection account for the pppoe

connection.

-pwd To configure the pppoe connection password for the pppoe

connection.

-http Change the http port. User can change default HTTP port

(80) to another one for security or NAT application.

4.2.8 [time]

When SNTP function of Gateway is enabled and SNTP server can be

found as well, type time command to show current network time.

-----------------------------------------------------------------------------------------------

usr/config$ time

Current time is THU JAN 01 05:29:23 1970

4.2.9 [ping]

Use ping to test whether a specific IP is reachable or not.

For example: if 192.168.1.2 is not existing while 192.168.1.254 exists.

Users will have the following results:

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 99 100

Sin comentarios

Welltech FXSO Gateway In SIP V.1.2 Manual de usuario Pagina 67